Need help with Bulkhead and Loc Line

[OceansCoral]

Do i drilled out my glass for 1inch bulkhead. Now i'm searching for the Loc line modular pipes and realize that the biggest is 3/4". Is there an adapter that will make the 1inch bulkhead into a 3/4"? Anyone have any ideas on how i can fix this??

[runningstix]

get a pvc reducer at your nearest home depot.

[johno4]

<a href=showthread.php?s=&postid=13421320#post13421320 target=_blank>Originally posted</a> by runningstix
get a pvc reducer at your nearest home depot.

Yep, its that easy

[AZDesertRat]

1"x3/4" thread x thread PVC reducer and a can of black spray paint.

[customcolor]

<a href=showthread.php?s=&postid=13423952#post13423952 target=_blank>Originally posted</a> by AZDesertRat
1"x3/4" thread x thread PVC reducer and a can of black spray paint.
i beleave you mean 1"slip to 3/4" thread, well unless your buld head is threaded on the inside.

[AZDesertRat]

I only use thread x thread bulkheads, much easier to maintain if a leak develops somewhere. No cutting, trashing, replacing and re gluing, just unscrew, apply a little more thread sealant stick and reinstall.