PDA

View Full Version : Seachem Copper Reagent


bertmauricio
10/08/2008, 10:30 AM
Hi,

I just opened my Seachem Copper test kit to do a test and had a question. Can you tell me how much of reagent 1 should be in the cone shaped vial? When I hold it upright, there is only about 1/8" of reagent. (and that's the small tip of the cone) I would think there should be more for 75 tests. Please let me know.

Thanks,
Bert

dfs/la2
10/08/2008, 11:14 AM
Bertmauricio,

Thank you for contacting us. We pulled one of the Seachem Copper MultiTest. In the Copper Reagent 1 there is approximately ΒΌ of an inch of powder. When performing the test you take the Stir Rod and just dip it in the Reagent 1. Even though the powder is a small amount it will go a long way.

If you have any further questions please feel free to contact us.

Stacie R
Technical Support
Drs Foster and Smith (http://www.drsfostersmith.com/)