View Full Version : BIOS upgrade
Tony Romano
10/22/2008, 08:10 PM
I have firmware 4.00 and software 4.0.0.3. (wireless)
I have a laptop that has never been used with PF.
AllProfiLuxII_V404.zip - I have this firmware .zip
and this software...
ProfiLuxControl II_V4030.exe
CAn I install this on laptop - then connect via serial cable to PF?
Can I use USB to do firmware update?
Will I have any version issues?
Thanks
AQD_ottawa
10/23/2008, 06:35 AM
First never mix and match firmware to software, always must match
Second yes you can do updates via USB.
Tony Romano
10/23/2008, 08:54 PM
I can't seem to get firmware upgraded from 4.0.0.4 to 4.0.1.0.
Using USB or RS232 - 4.0 or 4.0.3.0 software.
What am I missing
It reads file then has upload error.
Thanks
AQD_ottawa
10/24/2008, 05:52 AM
Hi read the release notes regarding this in the thread Matthias placed you have to have the software installed first after 4.0 is installed
Matthias Gross
10/24/2008, 07:55 AM
I guess it is the common mistake:
you did not confirm YES on the ProfiLux as it is mentioned in the message box which appears before the download
you can go directly from any version 4.x to any 4.x
Tony Romano
10/24/2008, 08:50 AM
Are we talking yes in software or on unit itself?
Additionally could you point me to PDF for WLAN config?
Thanks
Matthias Gross
10/24/2008, 09:15 AM
on the unit
link:
http://www.ghl-kl.de/Produkte/Aquaristik/Download/Tutorial_LAN_WLAN_new_eng.pdf
Tony Romano
10/24/2008, 07:13 PM
good to go - thanks
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.