PDA

View Full Version : need some quick help with baffle size...


Moonstream
11/15/2008, 12:03 PM
I was wondering what the width should be for the baffles on my 30g sump? thanks!

Phyxius
11/15/2008, 12:08 PM
You want to cut them just shy of the actual width of the tank. Say 1/8 to under 1/4 " max. It will give you enough room to get a good bead of silicone under it. Easiest way to measure the width is too look at the end of the tank and measure it where you can see where the glass sides meets the ends. You can get an exact measurement there. If I still had my receipt from my 30g I would be able to get it off that for you but I don't anymore.....

Moonstream
11/15/2008, 12:11 PM
thanks! I'll go try that now and decide on the final layout for the tank!