question about aqua c remora pro

[laredo300c]

ok so i'm looking into this hob and i like it because all the pictures show a air injection duct and spill for water return in the tank itself, but they offer a preskimmer and details show that it is for mag3 to cover up....is the mag 3 in the tank itself or on the back of the skimmer .......anyone has pics of this skimmer in their tank thanks

[jwithem26]

The mag3 pump is in the tank and the preskimmer goes in the tank withe the pump in the preskimmer box. I have this skimmer with the preskimmer box on my 75 and it works great.

[masonicman]

I have the same thing in my 75, but I took the preskimmer of because it was getting junked up with alot of crap and those little round snails the come out at night only.

[tedmc2]

Here’s a side end view of my Remora Pro with Mag 5. I also had the skimmer box but didn’t like it. There have been a couple posts where the pump came loose from the tubing and began shooting water out of the tank. I used a longer piece of tubing and set the pump on a piece of PVC.

It's not a great pic but you can get the idea.

[IMG]http://reefcentral.com/gallery/data/500/52924IMG_0344_2.jpg[IMG]

[tedmc2]

http://reefcentral.com/gallery/data/500/52924IMG_0344_2.jpg

[laredo300c]

ok thanks that picture is just what i needed to make my decision on not buying that skimmer ...will the warner marine h2 match the performance of the aqua c.