Aqua Surf & wavebox basics?

[775coral]

Good Day!
I have two 6200.01s and 2 AGE built external waveboxes built into one side the 96x48x31 Aquarium. Can one use the 6200.01 units with the Aqua Surf to work the waveboxs?

Will One Aqua Surf also control three other Tunze pumps in this aquarium if the wavebox pumps are connected to the Aqua Surf with the Y cable? – or would I be limited to the 2 wavebox pumps + 2 other independent channels?

Thank-you in advance

[kenargo]

One AquaSurf contains 4 control outputs, separately programmable. Each output can control 1 pump (or 2 using a bridge).

[775coral]

"or 2 using a bridge"

Is the bridge something that neptune or tunze sells? or a wire i can make?
Thanks for the help

[kenargo]

It is a Tunze device that allows 1 control plug to be faned out to 2 pumps; the standard bridge has 2 control connections and supports 2 pumps each (4 pumps total).

Here is a link to it (Tunze calls it a "Y" Adapter):

http://www.tunze.com/149.html?&L=1&C=US&user_tunzeprod_pi1[predid]=-infoxunter026

and an image of it:

http://www.tunze.com/fileadmin/images/product_database/7092.340.jpg