I Need Mesh Mod Pic's.....

[vito is hooked]

Just got my enkamat today, now I need some general Idea's. Thank's A Bunch. :beachbum:

[Tswifty]

Not my pics... I saved them from a thread a LONG time ago for when I need to redo mine.

http://i287.photobucket.com/albums/ll128/tswifty8/Mesh%20Mod/Mesh1.jpg

http://i287.photobucket.com/albums/ll128/tswifty8/Mesh%20Mod/Mesh2.jpg

http://i287.photobucket.com/albums/ll128/tswifty8/Mesh%20Mod/Mesh3.jpg

http://i287.photobucket.com/albums/ll128/tswifty8/Mesh%20Mod/Mesh4.jpg

http://i287.photobucket.com/albums/ll128/tswifty8/Mesh%20Mod/Mesh5.jpg

[vito is hooked]

Simple enough, Thank's, T. :beachbum:

[Tswifty]

No problem. Also, I've seen it recommended to find the smallest zip ties you can.

Good luck.

[vito is hooked]

I was thinking about trying some super glue gel instead of zip ties. I'm sure someone has tried it. Might be more trouble than it's worth. Well I got all day to fool around with it. Thank's again.

[eros]

I have used zipties and it worked well but I was told that fishing line is better. So far I have not been able to get the fishing line to hold long term. I am using 50lbs line but no luck. I think I am going to try some of the braided type and see if it works better. I think the knots are just working themselves loose coming apart. I don't think super glue will work, especially not when using multiple layers. I used super glue to try to secure the knots of the fishing line but that didn't work either. I'm still working on perfecting my technique.

[InsaneClownFish]

Tswifty, show us 10,000 :D

I know you can get this mesh in the hardware store, but it's been so long since I've thought about a mesh mod. What section is it in again...IE what's the conventional use?

[vito is hooked]

<a href=showthread.php?s=&postid=14291618#post14291618 target=_blank>Originally posted</a> by eros
I have used zipties and it worked well but I was told that fishing line is better. So far I have not been able to get the fishing line to hold long term. I am using 50lbs line but no luck. I think I am going to try some of the braided type and see if it works better. I think the knots are just working themselves loose coming apart. I don't think super glue will work, especially not when using multiple layers. I used super glue to try to secure the knots of the fishing line but that didn't work either. I'm still working on perfecting my technique. You might wanna try a little heat on those knot's with super glue. I'm working on a MJ 1200 with a Bio Ball Mod ,which made a big difference, now I'm useing a half a Bio Ball with all the middle pins twisted off, just the outside one's left, and put the mesh right on that. I'm gonna try the fishing line deal and see what happen's

[bryan ayo]

last mod i did for my msx200..i used 20lb fishing line...i want to believe it made the skimmer a little quieter!!