Aquasurf Not Working

[crazieveggie]

If I use the following,

One of my 6101's doesn't even turn on.

Any ideas would be greatly appreciated.

If Time > 00:00 Then WV1 PF1
If Time > 00:00 Then WV2 PF2
Pmp MODE sd for PF1
Pmp Int 030/100 for PF1
Pmp OSC 07/07/00 for PF1
Pmp MODE Sd for PF2
Pmp Int 030/100 for PF2
Pmp OSC 00/07/07 for PF2

I'm wondering if the RJ-45 is pinned backwards or something.
When pluged into the aquasurf the wires are as follows looking down from left to right.

Yellow, Green, Red, Black, Yellow, Green, Red, Black.

Thanks.

[kenargo]

One way to test the unit if to use manual control; when the pump is plugged in and correctly configured (address) then manual off should turn off the pump and manual on should turn the pump on 100%. be sure you are not plugging the Tunze pumps into a DCx; it is not needed.

[crazieveggie]

Ken,

I appreciate it. I will try when I get home tonight. The Tunze Pumps are pluged into a seprate outlet for power. That is correct right?