View Full Version : offer filters and resin for this rodi?

04/16/2009, 07:58 PM
its an aquasafecanada
6 stage i believe.
i need new resin and filters
do you offer these or replacements.

Buckeye Hydro
04/17/2009, 03:32 AM
Yes sir - those are all standard sized filter housings. Do you have a picture of your system or a website reference?

04/17/2009, 09:13 AM
i can tell you
it have 3 bottom filters
then on top there is one whiteone.
then 3 other ones with blue end caps

Buckeye Hydro
04/17/2009, 11:14 AM
So in order of water flow, you probably have:
1. Sediment filter
2. Carbon
3. Carbon
4. RO Membrane in the white horizontal housing
5,6,7: DI resin in the clear housings with blue ends.

If you put a good quality carbon block in stage 2, and assuming you don't have chloramines in your water, you don't need a second carbon stage.

Assuming you are on city water and don't have any particular problem with heavy sediment loads, go with:
1. 1 micron sediment filter
2. 0.6 micron carbon block
3. empty, or a 5 micron carbon block if you'd like
4. I assume your RO membrane is ok?
5, 6, 7 - order 5 lbs of mixed bed resin and refill each housing. Also get some extra tubing so that you can unclip the housings and orient ech of them vertically with bottom up flow.


04/17/2009, 02:03 PM
i see is there a number i could call you at to get this all figured out and the prices thanks for all the help

Buckeye Hydro
04/17/2009, 03:18 PM
Yes - some of the detailed discussion to tough to do here/email.