Down and select buttons switched

[the3dwizard]

I just upgraded the firmware on my AC3 Pro from 3.0 to 3.3. Now the down and select buttons on the front are reversed. It's a pain to use the front panel now. Any suggestions?

thanks,

[clp]

The AC3 firmware is installed instead of the AC3Pro firmware. Download and install this: http://www.neptunesys.com/~clp/images/downloads/aqua3pro_070821_3.3c.zip

Curt

[the3dwizard]

Man I feel stupid. Download the wrong one by mistake. Thanks!