View Full Version : Direct Connect vs. Energy Bar
aalhait
06/05/2009, 03:02 PM
What max length of cable for either the Direct Connect and Energy Bar?
I take it the Direct Connect uses a phone cable and the Energy Bar uses a USB?
Am I right?
What is the capabilities / differences between the 2?
Thanks
kenargo
06/05/2009, 04:24 PM
DC8 has a documented limit of 10-15 feet (I can't find the actual number but it is close). I've heard of people extending that but supported is quite short.
EB8 uses a AquaBus cable (USB-like) and I think Curt mentioned 200 feet (documentation says lengths over 200 feet).
Also, according to documentation EB8 can have defaults in case of lost communications with the controller; DC8 is dumb and only changes state when a command is sent to it from the controller. There are other differences like current sensing and such as well.
Here is a link with lots of information:
http://www.neptunesys.com/index.php?option=com_content&task=view&id=43&Itemid=40
laverda
06/07/2009, 05:47 PM
You can use Cat5 network cabling for longer lengths on the DC8, but not as long as the AquaBus reliably.
vBulletin® v3.8.4, Copyright ©2000-2012, Jelsoft Enterprises Ltd.