View Full Version : Swirling Cap Pics
BeakerBob
06/22/2009, 06:52 PM
Just playing around with some top down shots of my mixed growth cap:
http://img.photobucket.com/albums/v505/beakerbob/1DSC_0803.jpg
http://img.photobucket.com/albums/v505/beakerbob/1DSC_0776.jpg
t4zalews
06/22/2009, 06:54 PM
do you know why my red cap doesn't scroll...instead it just plates out, about 4 in. wide now.
Killer scrolls you got there
spsfarmer09
06/22/2009, 07:15 PM
how do you get them to scroll?
Junyoungmin
06/22/2009, 07:16 PM
i read that is has to do with flow. the more flow you have the more it scrolls and the less flow the more it plates...or is it the other way around..
BeakerBob
06/22/2009, 07:29 PM
Yes, you need to have sufficient flow to make the caps scroll, otherwise, they just plate out in one plane.
spleify
06/22/2009, 08:34 PM
Wow awesome shots and beautiful corals!
Thanks for sharing
Zylski
06/23/2009, 11:13 PM
Wow cool shots! I have my caps set up so they do that i cant wait for them to start growing really big
WILLIAM2
06/23/2009, 11:23 PM
Very nice Ill have to add a couple more PH to my 180.
scaryperson27
06/23/2009, 11:49 PM
Also, if you epoxy one to the bottom of a verticle pipe or branch rock, it will swirl as it grows towards the light.
2farNorth
06/24/2009, 04:55 AM
Here's a couple shots of mine, kinda hard to see with the Acros in the way....
http://www.jimsreef.com/tanks/120/inhab
http://www.jimsreef.com/tanks/120/inhab
Stanley-Reefer
06/24/2009, 05:05 AM
nice pics. Do you all have to periodically trim yours too? I just had to thin out 2 PRETTY pieces in my 90 because they were shading too many corals below them.
hatfielj
06/24/2009, 07:47 AM
<a href=showthread.php?s=&postid=15239980#post15239980 target=_blank>Originally posted</a> by spsfarmer09
how do you get them to scroll?
In my experience they won't start to scroll until they get to a certain large size (probably greater than 6" diameter or more).
I'm sure flow helps, but size is probably more of a factor.
t4zalews
06/24/2009, 08:46 AM
I'm hoping that once mine get a certain size it will start to grow more verticle and less horizontal
swjim
06/24/2009, 08:57 AM
Those are really nice!
ct_vol
06/24/2009, 09:30 AM
<a href=showthread.php?s=&postid=15247987#post15247987 target=_blank>Originally posted</a> by 2farNorth
Here's a couple shots of mine, kinda hard to see with the Acros in the way....
Those darn pesky acros... I'll help trim and clear your view for you... ;) lol
Great pics everyone!!!
Frankenpora
06/24/2009, 11:18 AM
<a href=showthread.php?s=&postid=15248763#post15248763 target=_blank>Originally posted</a> by t4zalews
I'm hoping that once mine get a certain size it will start to grow more verticle and less horizontal
Break pieces off of the edge, and place them in the ceter of the cap.
t4zalews
06/24/2009, 01:06 PM
ill try that, just put them on top or glue them
Frankenpora
06/24/2009, 01:17 PM
Just set them on there, as long as you don't have a ton of flow right at it, it should be fine. If you do just wedge them in at the
base if you can. This usually cases the area you broke to scroll,
as well as the new growth IME.
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.