PDA

View Full Version : SWC (Octopus) NW 200 Skimmer for sale

murfman
07/04/2009, 07:34 PM
I upgraded my skimmer so it is time for my old SWC (Octopus) to go. It has been modified with the gate valve mod and turned into a recirculating model.

It was this model, until it was modified.
https://saltwaterconnection.com/inde...products_id=11

It has a small crack in the collection cup that has been repaired. This is a good skimmer, very efficient.

asking $200 Neg.

pictures available.
murfman
07/05/2009, 06:20 PM
$175????
murfman
07/06/2009, 03:15 PM
Going out of town Thurs, won't be back till 14th. Don't know if I will have access to the net or not.
murfman
07/22/2009, 09:57 PM
^^^
whyamisofly
07/22/2009, 10:04 PM
Whats the model number? (your link no longer works)
amonchak
07/22/2009, 11:45 PM
What is the skimmer's foot print?
spstimie
07/23/2009, 12:25 AM
dimensions? open to trades?
murfman
07/23/2009, 01:50 AM
https://saltwaterconnection.com/index.php?main_page=product_info&cPath=1&products_id=11

Link to the pix in the equipment forum;

http://www.reefcentral.com/forums/showthread.php?s=&threadid=1666239



- Overall Height: 22.5"
- Cup Removal Clearance: approx. 1"
- Reactor Diameter: 8"
- Footprint: 15” x 8.5" x 22.5"
- Octopus OTP-3000 Pin Wheel Pump included (approx. 790 gph)

With the pump attached, the measurement goes to about 19" from the edge of the skimmer body to the end of the pump. This can be reduced by putting a 90* elbow and turning the pump sideways.