PC4 status lights.

[Kakabub]

I have RKL with 2xPC4's. One of the PC4's shows all the correct blinking lights with corresponding outlet programming but the other PC4 does not. Everything works correctly but when the programmed outlets are in auto mode they don't blink. The led's in the powerstrip are good as they turn on solid when i override and turn on any of the outlets manually. I have tried turning both powerstrips off and restarting but no change. Any ideas?

[andywe]

What are they programmed for? Are thgey are programmed as timers, or timed light functions? Thats when they blink I believe.

My ports that are not programmed for a timed function, but are programmed for a switched function based off either another controller or an SWB do not blink when inactive.

[Kakabub]

They are programmed for my halides. Do they only blink during the 15 min cooldown?I just check again and now no ports on either strip are blinking but everything is switching on and off cerrectly.

[Kakabub]

Nevermind, figured this one out on DA's support forum. When you set the output to MH lights they will blink for 15 mins after they turn off to indicate the cool down period.

[andywe]

Yes, that is a timed function called smart start. WHen a socket is on a timer function and off, then it blinks.