PDA

View Full Version : Brand New MP40W NOT WORKING :(


Helfrichs Chic
07/25/2009, 12:18 AM
Read all the info did the adjustments to glass thickness mounted it and plugged it in. The LED flashed red randomly. I thought maybe my AC II was messing with it somehow so tried a different outlet. Same. It seems like the connection at the wave driver is not getting full contact. The green LED on the power supply is lit so seems like wiring or a bad connection. PLEASE ADVISE... I am so bummed I have been looking forward to trying this out all week. Let me know what I need to do next.

Looks like EcoTech has great customer service from what I have read on this forum so far.... I just wish it wasn't Friday, I assume I will be waiting until Monday. Thanks in advance!

Helfrichs Chic
07/25/2009, 05:24 PM
Here is a vid to help decide what to do come Monday. Thanks.
http://www.youtube.com/watch?v=oAHIP0l6c-k

subshop
07/26/2009, 05:49 AM
Helfrichs Chic, Just for the heck of it try cleaning the plug going into the controller with a paper towel and the receptacle for that plug with a Q-tip. Otherwise is may be a bad solder connection on the PC board. I wouldn't mess with that unless your real experienced with electronics and soldering. Don't be too disappointed because when you get it working you'll be REAL happy-there great products. Good luck, neil

EcoTech Marine
07/28/2009, 08:58 AM
Sorry that I wasn't able to respond yesteday. I was out of the office. Please follow this link for some walk-through's and if you can't solve the problem then please contact our customer support directly via phone or email:

http://ecotechmarine.com/faq/troubleshooting/q-my-pumps-driver-is-blinking-what-do-the-different-led-error-codes-indicate/

service@ecotechmarine.com
610.954.8480 ext 106