View Full Version : ALKALINITY way high
nitjt
08/03/2009, 06:07 AM
I have set up a Calcium reactor and and have been checking my dKh of both the effluent and tank and it's of the chart way high. I have been running the reactor a couple of weeks now. I use a salifert test kit my Ca is running about 420, pH 8.13. Everything looks fine, but I can't figure out why its so high and what if anything I need to do lower it.
Ricardo_Jorge
08/03/2009, 01:03 PM
Hi,
Your Ca is okay and pH too. What´s your Alk?
Remember that the Cacium Reactor provides more Alk then Calcium. And the Alk in the effluent tend to be very high because of it.
Hug
HighlandReefer
08/03/2009, 06:07 PM
Since your calcium level is ok, I would get a second opinion on your alk test kit before you make any changes. Alk kits will go bad after one year from the date of manufacture. This is a common problem.
nitjt
08/04/2009, 05:59 AM
My alk is over 30 on my kit, which is over a year old. I will give a new kit a try before I do anything thanks.
HighlandReefer
08/04/2009, 06:22 AM
:thumbsup:
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.