PDA

View Full Version : Need help with eshopps PF-300


skiwez
08/17/2009, 09:06 AM
Anyone use the eshopps PF-300 overflow box? I'm not sure how to attach get form the bulkhead to my sump? I was hoping to use 3/4 flexible tubing since all my other connections are like that but I can't seem to find the correct adapter to go from the 1 inch bulkhead to the 3/4 inch tubing

Thanks

TreyK
08/19/2009, 12:14 AM
I just got this box today. A 1 inch female adapter will not fit the bulkhead.. neither will a 1 1/2 inch or a 1 1/4 inch. What you need to do is go to a hardware store like lowes or home depot and get a tube connector. It looks like this:

http://www.drillspot.com/pimages/2578/257858_300.jpg

That will fit the bulkead. Next you need to get a 1 1/4 inch x 3/4 inch glue in adapter (I believe those are the right measurements, also dont be afraid to ask the guys at the store for help). Slip that in to the other end of the tube connector, tighten down the clamps, and your good to go. Now you can insert your 3/4 inch tubing into the adapter.