Am I crazy with this? (pics inside)

[JonnyD91]

This is prob. my 3rd thread about my stand but i keep seeing threads about tanks breaking. Based on the rest of my threads everyone says my stand is fine.

THe top is almos perfectly flat, except there is a 1mm gap on one corner. This is when i lay a level diagonal across the top. The other diagonal sides are perfectly flush. I just dont know the tolarance. I assume 1mm is irrelavent, but im parinoid and dont want it to break. Pics below

http://www.novoinnovativedesigns.com/jonnyd/DSC_0257.JPG

http://www.novoinnovativedesigns.com/jonnyd/DSC_0262.JPG

opposite diagonal corner. This one is flush
http://www.novoinnovativedesigns.com/jonnyd/DSC_0263.JPG

[LobsterOfJustice]

That looks more than fine to me.

[Saltcity]

Can't get much closer than that.... ;)

[sanababit]

looks fine to me too also, good luck

sana

[jayk198030]

OCD man... get out the hobby now...LOL

god if that makes you nuts...wait a while and you will shoot your self..(dont do at home)

[robs.mark]

Thats fine mate, your poly will allow for a couple of mm anyhow..

[JonnyD91]

Thanks guys, the tank will be in-wall, so its alot harder to recover from a crack or such when the tank is planted in the wall. LOL

[ginger7286]

Just to be sure it doesn't sway to much as the water places pressure on the glass I would shim the uneven corner. This will ensure it doesn't bend or flex the glass.

[Slphappy]

Dude! You better scrap the whole stand and start over!!!

:lol: Just kidding... Frankly, it doesn't get much better than what you've got showing in the pictures. I've seen worse to be sure... I think you're good to go.

Cheers

[droberts]

you could always just shim it so you will atleast feel better about it