Apex - Adjusting Feed Cycle

[JeF4y]

Where/How can I do this?

I have the latest beta firmware in it, and cannot find any menu area through the display or through the browser interface that will allow me to alter the length of a feed cycle.

Anyone know where/how I can alter this?

Thanks.

[kenargo]

It is under the Setup->Outlet->Feed Interval menu

[JeF4y]

Thanks Ken, will look again tonight, but I'm pretty sure I've been through that menu a few times without seeing it. Will let you know.

-Jeff

[JeF4y]

BTW, I did overlook this (duh). Got it sorted out now. Thanks Ken!

[ReddingReef]

It is under the Setup->Outlet->Feed Interval menu

Maybe I'm having one of those senior moments but I don't see a Feed Interval on the Outlet setup screen.

[RussM]

Maybe I'm having one of those senior moments but I don't see a Feed Interval on the Outlet setup screen.
It's only available through the menus on the display head. Use this to set the base time (in minutes) for feed cycles, then in outlet programming you can add extra minutes for selected outlets to remain shut off as desired, e.g. to delay your skimmer from coming back on.

[aquamanic]

on the display module's menu, not the browser. feed interval is one of those things that you can only do via the display.

[aquamanic]

dang Russ!

[ReddingReef]

thanks to both of you guys...11:57am it was a tie...time for a shoot out....sudden victory (pc for death)

[aquamanic]

He must have been lurking...

[RussM]

He must have been lurking...I just need a life... ;)