Skimmer programming help on apex

[Groundfury]

What programming would i need to use for my skimmer? I have my aquabus connected to a battery backup so it can send emails on problems. If my EB8 losses power and comes back on my skimmer will over flow due to high water so what do i need to add to keep my skimmer from coming back on for 3 min after power loss?

[RussM]

If Power Apex Off 010 Then ON
If Power EB8_3 On 005 Then OFF

The ‘If Power’ statement allows for outlets to be turned on/off in response to whether or not power is present to the Apex base unit or any of the EnergyBars. In the first example if power to the Apex base module is off, and for 10 minutes after power is restored the outlet will be turned on. In the second example if power to the EnergyBar with module address 3 is on and for 5 minutes after power is failed the outlet has turned off.

Page 42 of the manual.:p

[Black Mammoth]

If you have float sensors hooked up, you probably could write a program to trigger off of that. I plan on doing that, but I haven't gotten around to it. I also plan to write an alarm based on that float sensor as well. Just an idea.