PDA

View Full Version : 6025 To much?

GaryR1984
10/01/2009, 11:52 AM
Think a Tunze 6025 is to much for a 20x16x8 Nano?

My concern is it will push to much in a direction on such a small tank that it will blow sand everywhere, if I directed it up I'm afraid it will be to much there too.

I wanted Tunze only in the tank... :( I ordered everything I could Tunze for this tank! Must keep it going...

To give you a better idea of how small it is...

http://i52.photobucket.com/albums/g11/GaryR1984/P1012873.jpg
rvitko
10/01/2009, 04:26 PM
My main concern is the depth, if it will be bare bottom, it could work.
GaryR1984
10/01/2009, 04:40 PM
Any other suggestions?
rvitko
10/01/2009, 04:46 PM
The 6055 would be ideal because you could turn it down as low as 250gph.
GaryR1984
10/01/2009, 04:56 PM
Well there we go then. One of those and a controller. :)

Thanks.
shawnz28
10/01/2009, 08:43 PM
That is one cool little tank.
GaryR1984
10/01/2009, 11:13 PM
That is one cool little tank.

It's going to be a sweet build, problem is i strted to focus on it before my 150 build. lol...

I ordered black acrylic for a intank corner overflow, and I have a acrylic sump that about 10 gallons 100% filled. I should run about 6g in the sump and 10 in the display for a 16g system that will house a bunch of LPS and a clam from my display.

I'm in the middle of getting rid of some VorTech's and going to all Tunze product. Thus far I have a nice list of Tunze items for this nano including a very small return pump, skimmer, ATO, and more. :)

Looking at EvilC's LED lights too... This will be a blast.