PDA

View Full Version : CO2 tank connection issue


reeferhabit
11/01/2009, 07:45 PM
Should i be using teflon tape when connecting the regulator to the CO2 tank?
I am getting some leakage when I connect the regulator.

James77
11/01/2009, 07:48 PM
There should be a nylon or rubber washer on the regulator part. Does the nut on the regulator that attaches to the CO2 tank spin freely of the regulator pipe?

tkeracer619
11/01/2009, 08:07 PM
No, do not use teflon. As Jim stated there is a washer in there. If there is not the gas supply store can give you one.