Need Help with new bulbs

[mehaffydr]

I have two Outer Orbit 36" fixtures that have 2-250 watt MH that I have replaced with 14000 k bulbs but still need to replace the t-5 bulbs. Stock it came with.

2-39watt Actinic 460nm
2-39watt Actinic 420nm

Should I replace with the same or would there be a better choice?

I am using two of these fixtures on a custom 225 Gal tank that mesures 60" x 36" by 24" deep.
I have a mix of softies SPS LPS RBTA and fish.
Thanks for any advice.

[OrrG]

Replace both of them with 3 ATI Blue Plus and 1 KZ Figi Purple. You will get a ton more par than those stock actinics plus you will still get a nice dawn/dusk effect. I used the exact same combo in my old Orbit with 14k Phoenix halides and loved the look.

[grigsy]

Yeah, go with the ATI blue.

The Outer Orbit is a nice fixture but the stock bulbs are not so hot. You will do better with ATI.

[tkeracer619]

Replace both of them with 3 ATI Blue Plus and 1 KZ Figi Purple. You will get a ton more par than those stock actinics plus you will still get a nice dawn/dusk effect. I used the exact same combo in my old Orbit with 14k Phoenix halides and loved the look.

I would do the same thing but get 2 of each.