View Full Version : Aquasurf programing question
Claudio D
12/06/2009, 09:46 PM
Hi All
Sorry if this has been answered before
I set a: if feedA 005 then WM1 off
my problem is that I select FeedA and the tunzes stop OK but after the 5 minutes it does not come on again
am I missing something...
is there a line I am missing
regards
Claudio
kenargo
12/06/2009, 10:01 PM
Hi All
Sorry if this has been answered before
I set a: if feedA 005 then WM1 off
my problem is that I select FeedA and the tunzes stop OK but after the 5 minutes it does not come on again
am I missing something...
is there a line I am missing
regards
Claudio
The time a feed cycle is active is set using the display. The value in the program statement is NOT the feed cycle but rather the time 'in addition to' the feed cycle. For example; if FeedA if 5 minutes then the above statement would turn WM1 off for 10 minutes (5 minutes for the feed cycle + 5 from the statement).
Claudio D
12/06/2009, 11:09 PM
Wow
thanks, let me try and I will come back
thanks
Claudio
Claudio D
12/06/2009, 11:22 PM
Perfect
now the dum question, can I change the 5 minutes default in feedA and How
thanks again
regards
Claudio
kenargo
12/07/2009, 12:35 AM
The timers are set in the setup menu, 'Feed Interval".
Claudio D
12/07/2009, 05:41 AM
Thanks Again
regards
Claudio
Claudio D
12/15/2009, 07:31 PM
Hi all one more question
I know I have a max of 6 profiles for tunzes...
I will be setting 4 tunzes, and I believe I can use the same profile for diferent tunzes, is that right??, so I can alternate them in pairs...
How can I set "continuos, non pulsating 100% force " for a tunze so I can set the 4 tunzes and generate a "Storm", in order to lift sediments...
may be time activated ??, event activated?? random?
thanks again
Claudio
tuckdawaytoo
12/16/2009, 12:20 AM
See Ken Argo's webpage...right click his name in one of his posts. Excellent info with example programming...can have several programs and have Tunze's reference each one depending on input: time, actinics on, daylights on, etc.
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.