Mustang Boy
12/08/2009, 12:26 AM
ok guys i have an aquapod 24 and will be upgrading the pump in the back because it just went out on me now my question is this:
i have seen a mod where somebody put 2 mj900s in the rear sump and plumbed one into the stock outlet and another into an outlet he made on the right sump. Now if i did this with 2 mj1200s and used hydorflo( http://www.drsfostersmith.com/product/prod_display.cfm?c=3578+4588+11363&pcatid=11363 ) on the outlets would this along with a K-nano be too much, not enough, or perfect amount of waterflow in the tank for softies and a few LPS(dont have any corals yet gonna finish modding the lighting and cooling i the hood before going with any corals)
i have seen a mod where somebody put 2 mj900s in the rear sump and plumbed one into the stock outlet and another into an outlet he made on the right sump. Now if i did this with 2 mj1200s and used hydorflo( http://www.drsfostersmith.com/product/prod_display.cfm?c=3578+4588+11363&pcatid=11363 ) on the outlets would this along with a K-nano be too much, not enough, or perfect amount of waterflow in the tank for softies and a few LPS(dont have any corals yet gonna finish modding the lighting and cooling i the hood before going with any corals)