View Full Version : Broken Hydrofoamer shaft
Roger, where can I get the shaft for a Hydrofoamer in Chicago? I just realized that one of the pumps on my 9440 was not working. I took it apart and found the white shaft is broken and the pump is hot. I think everything is ok except for the shaft. Is it attached to the pinwheel permanently?
Anyway, any guidance from you is helpful here, I need to get this fixed quick so finding a replacement is urgent.
Thanks for any advice :).
Jeff
rvitko
12/21/2009, 10:16 AM
I can't think of anyone that would have it, the shaft is permanently fixed to the drive unit so you would need a 9420.047 drive unit. I will send you one, PM me your info. For the meantime I would convert it to a 9420 with the taller pipe and screw cap over the other pump inlet.
I can't think of anyone that would have it, the shaft is permanently fixed to the drive unit so you would need a 9420.047 drive unit. I will send you one, PM me your info. For the meantime I would convert it to a 9420 with the taller pipe and screw cap over the other pump inlet.
Thanks Roger, it was a shot in the dark. I appreciate the help and will pm you my contact info.
Jeff
Now I just need to find that cap lol...
rvitko
12/21/2009, 11:20 AM
If you can't find it a 3/4" FPT cap is all you need, you should be able to get one at any hardware store. Ideally you would put a garden hose gasket in it to seal it up well.
Got the parts today Roger. Thanks so much for everything. Happy Holidays :).
rvitko
12/29/2009, 09:12 AM
Thank you!
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.