big question

[bighen]

can the profilux 2 rs233 port be hook up to: rs232 to usb converter or rs232 bluetooth

[AQD_ottawa]

Yes it can be hooked up to a USB converter ;)

No it can not be hooked up to bluetooth.

[bighen]

THANKS for the quick answer

[hani]

i did try it with bluetooth, it worked, this is what i used
http://www.iogear.com/product/GBS301/

[AQD_ottawa]

This is interesting, can you share some more info on this as this would be a first, I can then put the info across to the GHL forum ;)

[AQD_ottawa]

what receiver did you use at the PC end?

[hani]

You need a bluetooth dongle, this is what i used, am sure it will work with any bluetooth dongle, i used this one bc it has a small footprint for my old labtop
http://www.rocketfishproducts.com/pc-125-3-rocketfish-micro-bluetooth-21-edr-usb-adapter.aspx

[hani]

one more thing , this setup does not have long range, it says up to 100m(330ft), but its realy up to maybe 30-40 feet.

[hani]

This is the write up i read through for the AC jr, it worked for the profilux2
http://www.coraltopia.com/2008/11/02/aquacontroller-jr/

[AQD_ottawa]

Good to know thanks.

Just one advisory here, please do not try and do firmware updates over Blue tooth, you may end up with a blue screen and the need for the fujitsu reload tool. But other than that this is great info thanks for sharing

[bighen]

has any one else try this

[tnoblett]

Understanding all this...

I have the PIII coming. Can't we use the USB port with a USB wireless adaptor to access the system through the webserver? Or do we have to have dedicated Wired Lan connection?

Thanks!

[AQD_ottawa]

You have to use the lan port the USB is not connected to the webserver hardware.