PDA

View Full Version : DC4 quickstart guide?


romanr
01/08/2010, 06:11 PM
Can someone give me the quick and dirty of adding a DC4 to an excisting AC3 w/ DC8? Is it as easy as just connecting a phone cable from the DC8 out to the DC4 in? DC8 is A01-08, how will the 4 DC plugs be addressed?
Feel free to tell me to look at the darn manual but hey, this is worth a shot!:)

RussM
01/08/2010, 07:50 PM
Looking at the DC4 with outlets facing up, the left switch goes down (ON) and the other 3 all go up (OFF) This will set the address range as B01-B04. Connect a 4-wire RJ11 cable from the OUT jack on the DC8 to the IN jack on the DC4. Done! Well, except for the programming...

If you want to use addressing other than B01-B04, hit the books ;) http://www.neptunesys.com/~clp/images/downloads/directConnect4%20Heavy%20Duty.pdf

romanr
01/08/2010, 08:02 PM
beautiful! Thank you very much.