PDA

View Full Version : broken I/O breakout box


tylorarm
01/14/2010, 10:53 AM
I broke off several of the little white pins that clamp down the wires in my I/O breakout box despite using pretty thin wire. I also can't seem to get the pins back in. Is the I/O breakout box essentially a wire to the Apex with serial like connection on one end and terminal block/ barrier strip (or whatever they're called) on the other? And if so, then can i just cut the I/O wire and use a terminal block on the end not connected to the Apex? And if i do so what colors correspond to what strip numbers? I suppose i could meter all the wires but easier if someone knows the color codes.

tylorarm
01/14/2010, 02:43 PM
Curt replied to my direct email, FYI:

I/O Cable Color Codes



Pin # Color Description
1 Black Input #1
2 Brown Input #2
3 Red Input #3
4 Orange Input #4
5 Yellow Input #5
6 Green Input #6
7 Blue Reserved
8 Purple or White Ground

Curt