PDA

View Full Version : Removing sand


scollier
02/21/2010, 07:56 PM
Any recommendations on removing 200 lbs of sand from my 300 gallon tank. I know I can syphon it out... Just looking for any other tips. I will either go bare bottom or go with a bigger particle size.

Octoshark
02/21/2010, 08:01 PM
I dont know from experience, but I would assume maintaining a clean 300 gallon barebottom may prove to be quite the task. It might take a long time to clean it out all the time, but again I dont know from experience that is just what my assumption would be.

Maybe someone else can tell you from experience.

Agu
02/21/2010, 09:10 PM
What's the issue that makes you want to remove it?

If it's blowing around just add the larger particle size over the current sand.

scollier
02/21/2010, 09:17 PM
It's fairly deep so I would still babb to remove some... Anyone have any tricks?

scollier
02/26/2010, 06:00 PM
no tricks to remove sand from a tank?

discocarp
02/26/2010, 06:07 PM
Siphoning a little bit with each water change is the way to do it, unless you are willing to drain and scoop.