PDA

View Full Version : question on joining hoses


godlyme
03/05/2010, 06:51 PM
when plugging in the blue and yellow or black hoses into the unit (say for example when hooking up the in and out ds meter), i noticed some of the other ones already pre assembled had a little blue lock type of thing on them....should i use those on the hoses i hooked up and where do you get them. looked like a little blue clip... thanks

Thefilterguys
03/23/2010, 11:54 PM
Sorry we lost contact with our forum for some unknown reason. We sell them on our fittings page under locking clips. One of my builders uses them to lock the fittings on the membrane flush around the restrictor. I don't use them but some people feel they give them extra security.

Jim

godlyme
03/24/2010, 06:14 PM
thanks for the reply... i just wanted to make sure it wasnt something that had to be done.

Thefilterguys
03/24/2010, 09:33 PM
As I said depends on your level of comfort and I have never used them in eight years on my personal systems or our test systems.

Jim