Removing tank braces

[Navyblue]

Since a standard 4x2x2' rimless tank is made of 1/2" glass, if I have a tank of the same dimension and glass thickness but with braces, can I simply remove the braces and turn it into a rimless tank?

[maynardjames]

i would be scared to try it. but i don`t know about much about it. try asking in diy forum.i have seen post there about same question, just don`t remember what replys were

[kmc08ups]

I just did this to my 29 gallon and have seen it done with the same tank of those dimensions.. You just need to euro brace the tank with non-consumer grade silicone.. daps, Ge, etc.. Use silicone such as Dow corning 999-a or momentive scs1200.. These silicone form a much stronger bond then consumer grade and yes the 3 I mentioned are aquarium safe I promise..

[Navyblue]

i would be scared to try it. but i don`t know about much about it.

So am I. :D

[Navyblue]

Never mind now, the tank is eurobraced and has no centre brace.

Thanks guys.

[tkeracer619]

The glass is the same but the silicone might not be. Stick with your eurobraced tank and enjoy :)