TS-48 Kit with Tunze Wave Box

[Andy]

Hi there.

I am currently running an old style TS-48 kit on my 72X30X30 reef and just picked up a Tunze wavebox at a great deal. Anyone out there have any advice as to how I should run these together to maximize the effect. I am currently running the 6101s in the 4 corners of the tank and was planning to put the wavebox between the 2 6101s at one end of the tank. Will the 6101s lessen the wave effect at all.

Thanks.

[rvitko]

If the pumps are aimed at the outflow of the wavebox they will reduce the wave height and you may see a small gain from pumps on the same side and a small loss with pumps on the opposite side, I would probably use interval 2 with a 6hr interval and alternate between sides and run the wavebox continuously.

[Andy]

Thanks Roger. Could you please be a little more specific about the settings on the 7094 multicontroller (ie. pulse setting, interval setting and mode setting).

[rvitko]

The 7094 doesn't have Interval 2, so I would just use Interval and a 6 hour interval. You would set mode to interval, pulse would really be up to you but 3 seconds from 30-100% would probably be best and for interval I believe the old 7094 had a switch setting of .2hr- 12hrs and you would then turn the knob roughly half way to 6 hrs. The knob would set the range from .2-12hrs.