PDA

View Full Version : aqua-c ev-120 skimmer questions


T575
06/11/2010, 01:56 PM
skimmewr sometimes skims, skimmer stops skimming after hands been in tank, other times it works great. over powered with a mag 700. let me know what you think

cobra9
06/11/2010, 02:24 PM
All skimmers stop working when you get oil in the tank. Weather thats from hands or oily food.

Injection and beckett skimmers just take a little longer to start skimming again. Its normal.



Try getting some rods. Takes my skimmer hours to start skimming after I use even a small amount of it.

jtma508
06/11/2010, 05:13 PM
I have an EV-180. Make sure you remove and clean your air valve about once a month. They slowly clog with a salt plug and performance will suffer.

dixiedog
06/11/2010, 09:05 PM
I had an EV120 with a Mag 7 also.

It too would stop skimming for quite a while if you fed the tank anything at all, touched the water, or looked at it funny. It is indeed normal for an injection skimmer ... but it bugged me. I'd never own one again, for that reason and also the heat thrown off by the mag drive pump.