F/S Ca reactor Pkg

[poolkeeper1]

for sale, Coralvue CR140 single chamber Ca reactor W/Reborn media (New)
New Octopus regulator W/5lb Co2 Tank (Full) PH Probe All you need is a Controller to get started. I ran this set up on my 185 gal heavy stocked SPS tank and It did a great job. Will not split up at this time 250.00 Takes all.
Not looking to ship would like to sell local If possible.
I am willing to help you understand how to set the reactor up but don't want to have to come to your house to get it running, This is a very stable set up and you will be amazed how easy it is to stabilize your tank.
Thanks for looking.
Bill:idea:

[Pickupman66]

bill, what pump did you use to push water thru it? my aquamedic is dead and I either need a new motor or a whole new pump.

[poolkeeper1]

bill, what pump did you use to push water thru it? my aquamedic is dead and I either need a new motor or a whole new pump.

I use an Aqualifter pump, Which I forgot is Included with the set up.
Bill:D
PS On another set up I ran the Reactor off the Manifold/Main Pump

[poolkeeper1]

for sale, Coralvue CR140 single chamber Ca reactor W/Reborn media (New)
New Octopus regulator W/5lb Co2 Tank (Full) PH Probe All you need is a Controller to get started. I ran this set up on my 185 gal heavy stocked SPS tank and It did a great job. Will not split up at this time 250.00 Takes all.
Not looking to ship would like to sell local If possible.
I am willing to help you understand how to set the reactor up but don't want to have to come to your house to get it running, This is a very stable set up and you will be amazed how easy it is to stabilize your tank.
Thanks for looking.
Bill:idea:

http://www.aquacave.com/searchresult.aspx?CategoryID=95
This is the reactor, New Alone It's 239.00 Empty,Media 32.00, Regulator 89.00
Co2 tank 80.00, Aqualifter 22.00,Co2 14.95, PH probe 44.95 total cost around
500.00+ New Used around 5 months.
This is a steal Folks
Bill

[mixer911]

Great Deal!!

[poolkeeper1]

SOLD, Thanks Anthony
Bill
Mods please close thread.
Thanks

[Pickupman66]

Bill,,

so you had it manifolded off the main return sump return? hmmm.. thats not a bad idea. controll it with a ball valve

[poolkeeper1]

Bill,,

so you had it manifolded off the main return sump return? hmmm.. thats not a bad idea. controll it with a ball valve

Yes and no, I powered everything off my manifold including a water change line W/Ball valve. But the reactor was controled by a little Rodi Valve in the 1/4" tubing, And yes it was clever because I'm Cheap.
Bill:bum:

[Pickupman66]

same here. ill have to see if I can come up with something. I have the aqualifter but it is driving the coil denitrator

[ameares8]

Thanks for the steal Bill! I think I have it all setup now. Did you get yours going?

[poolkeeper1]

Cool, Yeah i got it going water dried up but my PH is running much lower with this one. I'll have to work on getting it dailed in as far as Co2 goes, Every reactor is different. And Thanks to Zach for the deal on his!
Bil