what wire to connect to powerbar?

[sparx22631]

i got a ethernet to ethernet end that does not go into the pro its self but the jack fits the powerbar. and help on this? did mine come with the wrong cable? if so can i go to a local store to purchase one?

[sparx22631]

Help!!!!!

[AQD_ottawa]

do you have a PAB power bar or standard? it says on the label on the top front by the LED lights.

[sparx22631]

pab please help me out mike it came with my pro 3 beginer

[AQD_ottawa]

So you need "ANY" off the shelf cat5e ethernet cable, this goes between any one of the two ethernet sockets on the PAB power bar and the PAB socket marked PAB on the back of the controller.

Normally the kits come with the PAB cable (cat5e) included but always as it is hard to know how long ech client will need in cable length.

[sparx22631]

But doesn't need to go into the s1 port? Wich is a different cable like a phone jack. Thanks mike for being prompt

[AQD_ottawa]

No, the S1-4 port is for the standard NON pAB power bar the PAB powerbars go into the PAB port

You have a PAB power bar so it goes into the PAB port and NOT the S1-S4

[sparx22631]

awesome thanks so much mike seriously !

[sparx22631]

how do i get to control the sockets now?