jsc0787
08/25/2010, 12:02 PM
Hello, I'd really appreciate any help in programming the following scenario:
4 pumps, 2 on at a time in 6 hour intervals.
All pumps off
P1 on at 30
3 seconds later P2 on at 30
3 seconds later P1 at 100
3 seconds later P2 at 100
3 seconds later All Off.
Repeat for 6 hours.
After six hours same thing but with pumps 3 & 4.
After six hours same but with pumps 1 & 2
etc....
This program would allow a swellling current going clockwise for six hours and then counterclockwise for six hour to coincide with "tides" - all with just 4 pumps. Any help is greatly appreciated!
4 pumps, 2 on at a time in 6 hour intervals.
All pumps off
P1 on at 30
3 seconds later P2 on at 30
3 seconds later P1 at 100
3 seconds later P2 at 100
3 seconds later All Off.
Repeat for 6 hours.
After six hours same thing but with pumps 3 & 4.
After six hours same but with pumps 1 & 2
etc....
This program would allow a swellling current going clockwise for six hours and then counterclockwise for six hour to coincide with "tides" - all with just 4 pumps. Any help is greatly appreciated!