PDA

View Full Version : Wavebox not working


chark
11/01/2010, 02:27 PM
I did a water change and turned off the wavebox. When turned on again it did not work. It was dirty so I cleaned the pump. Still did not work. Found that the power supply light does not come on. Had a friend check and no power is coming out of the power supply. Looked at the 24v fuse and it looks discolored. Friend also tested the fuse and said it was blown.

This a likely problem? What is the part number for the replacement.

Thanks,

Cecil

rvitko
11/01/2010, 02:45 PM
It is a resistor and not a fuse, it can be blown but the unit would still light up, I would suspect you need a new power supply.

chark
11/02/2010, 11:50 AM
What is the part number for the power supply? I looked online but not sure what part number that would be for the power supply.

Thanks for the help.

Cecil

rvitko
11/02/2010, 01:01 PM
6105.240

chark
11/05/2010, 07:23 AM
Does the power supply come with a 24v resistor?

rvitko
11/05/2010, 08:50 AM
Yes, 12, 18 and 24 should be included.

chark
11/07/2010, 05:33 PM
Thanks for everything Roger. I have ordered the part.

rvitko
11/08/2010, 10:19 AM
Got your order, we will ship today.