fitch4
11/17/2010, 07:58 PM
Time to clean out the stuff I have accumulated at school and at home. I am looking to put the majority of the $ back into the school systems via livestock and supplies. I will consider partial trades for bigger fraggable corals that I can add to my school systems for the kids to work on but would prefer to do cash. Here is what I have:
http://i557.photobucket.com/albums/ss12/fitch4CT/DSCF7329.jpghttp://i557.photobucket.com/albums/ss12/fitch4CT/DSCF7333.jpg90 Gallon Acrylic Tank (48"x18"x24") w/ custom stand and sump. This was my mian display and fomer CTARS tank of the month but I am consolidating my systems to make it easier to maintain. It has one central hole with a custom overflow (see pic) The tank has minor scratches at most (always the worry with acrylic) and is in very good shape. The stand is solid and in good shape as well. The beauty of the tank is you can drill anywhere you want and run more overflows, closed loop, whatever! The sump is a strange shaped tank but fits into the stand and has baffles already in it. It has a large central chamber for a skimmer or whatever. I will include all of the plumbing I used to get the water down and back up as it was. Asking $300 for the tank, stand, sump, and plumping parts (no pump).
http://i557.photobucket.com/albums/ss12/fitch4CT/DSCF7336.jpg
30 Gallon Tall Acrylic Tank (24"x13"x24" unusual shape) with pine stand and custom flow "kit". The tank is in great shape with little if any scratching. There are no holes drilled in the tank but you could drill it a number of ways to make it do just about anything you can dream up! The stand is in decent shape but could use a new coat of poly to shine it up a bit. I will include the custom flow set-up I had in it (a series of spray bars that can be attached to any pump- see pic) which worked awesome to create flow with no internal powerheads. I will also throw in the fluval 202 that I had used to run it. Looking for $150 for the tank,stand, and flow "kit".
-Remora Skimmer (the smaller hang on back unit) w/ Maxijet 1200 $50
-Remora Pro w/o pump (the bigger hang on back unit) $75
http://i557.photobucket.com/albums/ss12/fitch4CT/Coral003.jpg
-Jenco pH,ORP controller. Was used to run the Calcium reactor I have at school but I am going to use the new RKE to do the work now (once I get the programming worked out!) The unit works but could use a new pH probe $50
http://i557.photobucket.com/albums/ss12/fitch4CT/Coral004.jpg
5 x Biotherm heater controllers. Again used at school but I am going to let the RKE do the work. Nice to have as a backup and for a nice big temp display. They are specked to run up to 1000W each. $10 each.
http://i557.photobucket.com/albums/ss12/fitch4CT/Coral001.jpg
Pinpoint wireless thermometer set-up with atleast one thermometer (I think I have another, I just have to find it!) $10
http://i557.photobucket.com/albums/ss12/fitch4CT/Coral2010007.jpg
48" PC fixture for 2 x 55W bulbs. Fixture works and would be great for a refugium or low light coral tank. I do not have bulbs for it. $15
http://i557.photobucket.com/albums/ss12/fitch4CT/Coral2010003.jpg
http://i557.photobucket.com/albums/ss12/fitch4CT/Coral2010006.jpg
48" Old Hamilton 2 x 400W mogul based MH and 2 x VHO fixture with fans. I do not have the ballast to run it but it seems like someone could use it. It has bulbs in it of unknown age (or type!). I inlcuded a picture of the plugs for ref. I have no plans for it and it would certainly be useful to someone who wants to put a few minutes into it. $20
For all of these, it is first paid that takes it. As I mentioned, if you have bigger, fragables that I could use at school I will consider partial trades. Thanks!
Jon
http://i557.photobucket.com/albums/ss12/fitch4CT/DSCF7329.jpghttp://i557.photobucket.com/albums/ss12/fitch4CT/DSCF7333.jpg90 Gallon Acrylic Tank (48"x18"x24") w/ custom stand and sump. This was my mian display and fomer CTARS tank of the month but I am consolidating my systems to make it easier to maintain. It has one central hole with a custom overflow (see pic) The tank has minor scratches at most (always the worry with acrylic) and is in very good shape. The stand is solid and in good shape as well. The beauty of the tank is you can drill anywhere you want and run more overflows, closed loop, whatever! The sump is a strange shaped tank but fits into the stand and has baffles already in it. It has a large central chamber for a skimmer or whatever. I will include all of the plumbing I used to get the water down and back up as it was. Asking $300 for the tank, stand, sump, and plumping parts (no pump).
http://i557.photobucket.com/albums/ss12/fitch4CT/DSCF7336.jpg
30 Gallon Tall Acrylic Tank (24"x13"x24" unusual shape) with pine stand and custom flow "kit". The tank is in great shape with little if any scratching. There are no holes drilled in the tank but you could drill it a number of ways to make it do just about anything you can dream up! The stand is in decent shape but could use a new coat of poly to shine it up a bit. I will include the custom flow set-up I had in it (a series of spray bars that can be attached to any pump- see pic) which worked awesome to create flow with no internal powerheads. I will also throw in the fluval 202 that I had used to run it. Looking for $150 for the tank,stand, and flow "kit".
-Remora Skimmer (the smaller hang on back unit) w/ Maxijet 1200 $50
-Remora Pro w/o pump (the bigger hang on back unit) $75
http://i557.photobucket.com/albums/ss12/fitch4CT/Coral003.jpg
-Jenco pH,ORP controller. Was used to run the Calcium reactor I have at school but I am going to use the new RKE to do the work now (once I get the programming worked out!) The unit works but could use a new pH probe $50
http://i557.photobucket.com/albums/ss12/fitch4CT/Coral004.jpg
5 x Biotherm heater controllers. Again used at school but I am going to let the RKE do the work. Nice to have as a backup and for a nice big temp display. They are specked to run up to 1000W each. $10 each.
http://i557.photobucket.com/albums/ss12/fitch4CT/Coral001.jpg
Pinpoint wireless thermometer set-up with atleast one thermometer (I think I have another, I just have to find it!) $10
http://i557.photobucket.com/albums/ss12/fitch4CT/Coral2010007.jpg
48" PC fixture for 2 x 55W bulbs. Fixture works and would be great for a refugium or low light coral tank. I do not have bulbs for it. $15
http://i557.photobucket.com/albums/ss12/fitch4CT/Coral2010003.jpg
http://i557.photobucket.com/albums/ss12/fitch4CT/Coral2010006.jpg
48" Old Hamilton 2 x 400W mogul based MH and 2 x VHO fixture with fans. I do not have the ballast to run it but it seems like someone could use it. It has bulbs in it of unknown age (or type!). I inlcuded a picture of the plugs for ref. I have no plans for it and it would certainly be useful to someone who wants to put a few minutes into it. $20
For all of these, it is first paid that takes it. As I mentioned, if you have bigger, fragables that I could use at school I will consider partial trades. Thanks!
Jon