Any suggestions on my Plumbing? (Pics) [Archive]

Bigjohnwoody

11/20/2010, 11:55 AM

Ok so I am plumbing in my tank and have pretty much gotten done but have not finished installing the pump. So if you could look at my pics and tell me how I did and let me know if you think there is anything that I need to change and why that would be awesome. The tank is an AGA 120 RR so I have dual overflows and ran two drain pipes. One to my skimmer section and one to my fuge section. The return is in the center of my sump and goes up and then after it goes through the wall it T's and goes to each return section in my dual overflows. I used flex PVC to run the return and drain lines. I am using the Durso standpipe method for my overflows. I am running a eheim 1262 for my return and am planning on running vortechs for my circulation. I have also bought two gate valves and will install one on my return pipe if the eheim is to strong. I also thought about putting one on my fuge drain pipe to slow down the flow if I need to. I do not know if this is a good idea or not since I have heard people say both so input on this would be great. If any additional info is needed or a more in depth pic please ask!

http://reefcentral.com/forums/picture.php?albumid=3211&pictureid=23218
http://reefcentral.com/forums/picture.php?albumid=3211&pictureid=23219
http://reefcentral.com/forums/picture.php?albumid=3211&pictureid=23223
http://reefcentral.com/forums/picture.php?albumid=3211&pictureid=23224

dots

11/21/2010, 01:55 AM

Nothing jumps out at me directly expect I don't like to see the overflow returns to be restricted, bent, or diverted. You could experience some accumulation over time. With proper attention to maintenance, you should be fine.

Clean looking though, I think your off to a good start.