WXM Module

[crsandoval]

I have two MO40's. I added both, one accepts the commands and the other defaults to constant at 100% and I cannot turn the MP40 off or control any functions.

[crsandoval]

I also get these errors as well.

\\ Error: Expected ON or OFF OR PFx //Error: line 4 - If Time 10:00 to 14:00 Then TidalSwl
\\ Error: Expected ON or OFF OR PFx //Error: line 5 - If Time 16:00 to 20:00 Then Nutrient
\\ Error: Expected ON or OFF OR PFx //Error: line 6 - If Time 22:000 to 06:00 Then Night
\\ Error: Expected ON or OFF OR PFx //Error: line 7 - If FeedA 000 Then Slow

[RussM]

Do you have profiles named TidalSwl, Nutrient, Night, & Slow?

[crsandoval]

no, I guess I should create them.

[crsandoval]

I created the profiles, yet the second MP40 is still running in Constant Mode and I cannot even manually turn it off.

[aquamanic]

Have you created a Sync and/or Antisync profile? If you want your pumps sync'd then you need to do that and assign the sync profile to one of the pumps (in the sync profile it will define the other pump as the master). This way, pump 1 is the master and pump 2 follows along (sync) or does the exact opposite (antisync).

If you want them to be completely independent, then you have to assign profiles to each of them based on time of day, etc.

[crsandoval]

I've set up the profiles, but it keeps displaying the pump status in the web interface as missing. Yet, when I delete the outlet in an attempt, to create it as a slave to the wxm it resets itself as though it was receiving instructions from the apex

[crsandoval]

I had the variable speed ports off as well. Does that affect it?

[crsandoval]

Issue solved, one Ecosmart was using older FW. I contacted Neptune and of course its always a basic step... things are working great now!