will this break my overflow box?

[tankaddict]

http://i131.photobucket.com/albums/p305/drkcloud794/photo.jpg

would this be too heavy for the overflow box? i didnt want to go the flextubing route. has anyone used pvc for the cpr cs overflow?

[BeanAnimal]

Bulkheads and similar fittings should never be used to support plumbing. The plumbing needs to be supported by other means.

[BeanAnimal]

Also, I would be amazed if that pipe drains quietly into the sump. Depending on flow it is likely going to flush and gurgle a lot.

[Chris27]

Simply strapping that plumbing to the back of a stand will support that setup sufficiently.

[tankaddict]

Also, I would be amazed if that pipe drains quietly into the sump. Depending on flow it is likely going to flush and gurgle a lot.

Thanks for the input. If i cant strap it then i would have to buy the flex tubing. they are pretty darn expensive, 10 bucks for 4 ft. I did run water through the overflow and it drained very quiet, but im new to the hobby so i do not know very much about plumbing. this is my 1st sump build so any help would be great!