PDA

View Full Version : question for the filter guys


flyline
03/15/2011, 05:40 PM
i was just wondering what is normal for the waste water coming out? it just seems like alot so i just want to make sure that it is normal

Scott99
03/16/2011, 09:24 AM
Make sure if you have a flush kit, that it is in the off position during normal use. Otherwise that will increase your waste water significantly.

flyline
03/16/2011, 06:24 PM
yea its in the off position i was told the ratio for the filters is around 4 to 1...4 waste 1 pure does this sound right?

Thefilterguys
03/18/2011, 12:33 AM
The waste to product water ratio for single membranes is 4 to 1 and many customers say the waste looks much larger, but when measures they find the ratio is correct. Lower waste ratios can be achived by going to a dual membrane series kit, however you must have 65 psi or higher or an 8800 booster pump.

http://thefilterguys.biz/dual_membrane_kits.htm


Jim

flyline
03/23/2011, 05:08 AM
thanks for the replie jim