PDA

View Full Version : BRS two part doser + Auqa Controller Jr. HELP!


Bruce Wayne
03/16/2011, 10:53 PM
I have to dose more than 30 min per day, how do I set the same module to come on twice a day on an aquacontroller jr.? Thanks!

sjm817
03/17/2011, 05:13 AM
This is from an ACIII but should be the same for ACjr. DOS is the timer name for the dosing pump. In this example the dosing pump is on for 4 min, then off for 56 min. Total for the day = 4 x 24hr x 1.5ml = 144 ml

OSC 004/056 ON/OFF Then DOS ON

If you only wanted twice a day for 30 ml

OSC 010/710 ON/OFF Then DOS ON

This would have it on for 10 min twice a day. 20 x 1.5ml = 30ml.

Bruce Wayne
03/17/2011, 05:21 AM
maybe my acjr is old...that makes no sense to me, thanks though!

sjm817
03/17/2011, 05:44 AM
That is how you program them. Its harder on the ACjr without a web interface like the ACIII has. You can do the same with button mashing on the front panel. Look at the ACjr manual on page 18

http://www.neptunesys.com/images/downloads/AquaControllerJr_3_2%2BSerial_web.pdf

Bruce Wayne
03/17/2011, 05:46 AM
thanks!

sjm817
03/17/2011, 06:22 AM
FYI, Neptune has a sponsor forum here. Lots of great help is available there.