Fitting and connector help for return

[alpinestar]

What fittings or connector would I need to use to have my reactors running off return pump. I would like to har my return feeding my brs reactor any help would be great

[alpinestar]

Or what iOS the easiest way to plumb the reactor into my return pump pictures or links work to.

[OregonReefer]

http://www.bulkreefsupply.com/store/products/pumps-and-plumbing/plumbing-sumps-drill-bits-overflows-uniseals/schedule-80-plumbing-fittings-and-valves/sch-80-barbed-tube-fittings/1-2-schedule-80-barbed-tee.html

[aufo8mycat]

I have both ca and gfo and gac running off my return pipe, all i have done is cut pipe install a T fitting, with a thread on the bottom of the T then from irrigation shop bought a thread to barb fitting, for the gfo and gac. For the calcium i did similar thing but added a ball valve, then the threaded joiner, to which i needed a bush to down size the thread to add a john guest fitting to which the water feed clicks into
see pics
first is feed for gfo and gac
http://i1034.photobucket.com/albums/a422/123fishkeeper123/gac.jpg
next is CA reactor sorry a bit darker back there
http://i1034.photobucket.com/albums/a422/123fishkeeper123/car.jpg

hope that helps a bit.. but if you have soft pipe, is much the same sort of deal,