PDA

View Full Version : 90 gallon tank build w/30 gallon sump


mwoodruff964
05/03/2011, 09:52 AM
I thought I would give you guys an update on my tank build the tank has been cycling for over 2 weeks now and is coming along great! These pics were taken today and to see the entire tank stand and canopy build they are in my album. My equipment list as follows: Lights-Aquatics life T5 fixture, 150watt MH. Heaters-Eheim Jagar 125watt and 150 watt. Filter-7inch filter sock. Skimmer-Octopus 6 skimmer. Return pump-Mag drive 9.5. Overflow-Glass holes 700gph 1 1/2 drain line with 1inch return. The overflows enters on the left through the filter sock where the heaters are located then overflows into the skimmer and phosban reactor chamber then goes through a bubble trap into the return pump section which Ts off into the fuge section then overflows back into the return chamber so the flow can be controlled separate from the rest of the sump.

salali
05/03/2011, 09:58 AM
Amazing tank and be prepare to take down the brown algae.

mwoodruff964
05/03/2011, 11:13 AM
Here is the stand I built
http://i209.photobucket.com/albums/bb238/woody29_04/90%20gallon%20reef%20tank/IMAG0090.jpg

mwoodruff964
05/03/2011, 11:17 AM
the complete tank i built the canopy to match the stand
http://i209.photobucket.com/albums/bb238/woody29_04/90%20gallon%20reef%20tank/IMAG0228.jpg

Sinclair81
05/05/2011, 12:01 AM
Do you have any other shots of the stand being built? or the canopy?

mess7777
05/05/2011, 06:42 AM
nice job on the stand. A good looking stand can make the sytem look so much better in a house.

wrathofgod4
05/05/2011, 02:29 PM
Look nice i like the wood

Sinclair81
10/30/2011, 08:23 PM
Hello? Still looking for pics of the build!

jonathansruelas
10/30/2011, 10:17 PM
Looks good, post some pics when it's all full with awesome fish

billwill
10/30/2011, 10:37 PM
Great looking setup! I like your aquascaping choice. I did all four of my powerheads on the back wall with my 90G, and angled the outward ones toward the center and the ones at the overflow towards the corner. Works great, but i can't keep the sand in the corners :-)