PDA

View Full Version : code please


n8rad
05/12/2011, 08:36 PM
i need my relay outlet #4 to come on every hour for 2 minutes...what is the code i need to type in advanced.

I have an APEX

kenargo
05/12/2011, 08:51 PM
Fallback Off
OSC 058:00/002:00/000:00 Then ON

You could have done the same thing using the Pump mode (wizard) and specifying an Initial Off time of 58 minutes, on time of 2 minutes and 000 for the last value.

n8rad
05/22/2011, 08:02 AM
Is this what i need for it to turn on every 15 minutes for 55 seconds? Cause i dont think its working.

Fallback OFF
OSC 015:00/000:55/000:00 Then ON

kenargo
05/22/2011, 10:35 AM
Yes, that would to that; what isn't working about it?

n8rad
05/23/2011, 05:00 PM
yeah i dont think its working through the night because everytime i wake up my kalk powder has settled and my magnetic stir bar will not start because there is too much powder. If i manually get it going it stays stirring every 15 minutes just fine all day, but something happens in the middle of the night?

any ideas?

thanks!

RussM
05/23/2011, 05:19 PM
Is there any other programming for that outlet?

Check the XML outlet log to see if the outlet is being turned on and off as it should be.

kenargo
05/23/2011, 06:16 PM
As Russ mentioned; if you look at the Outlet XML you will see the times when the outlet is turning on and off; see if that matches your expectations. You can also graph the outlet and see it turn on and off (using the graph page).