PDA

View Full Version : Humidity and ambient temp


extremeshannon
05/17/2011, 02:20 AM
I am looking for a device that can sense room temp and humidity for my Apex system. I am looking for something like the ReefKeeper AP1 that will work on the apex.

Thanks

swearint
05/17/2011, 08:31 AM
I don't know of a single device that does both that would work on the Apex. However, you can use a PM(1,2,3) to monitor the air temp. Then you can use a humidistat hooked to the I/O port. It won't give you an actual measurement; rather, it is a discreet on/off switch than can be set to a desired humidity. Then you can program the Apex to respond when the switch is OPEN/CLOSED.

Todd

extremeshannon
05/18/2011, 11:00 PM
Thanks for the response. I will give that a try.