New look for a old sump

[ryno212]

I had a 29 tall that I took out of the bottom of my 60 cube. I was going to reuse it for my 20g rimless. Well it was too tall.... So I cut it down..
http://i332.photobucket.com/albums/m339/ryno0212/9c89d462.jpg
http://i332.photobucket.com/albums/m339/ryno0212/52151dd3.jpg
http://i332.photobucket.com/albums/m339/ryno0212/648f8e4c.jpg
http://i332.photobucket.com/albums/m339/ryno0212/f9014240.jpg
http://i332.photobucket.com/albums/m339/ryno0212/818dec06.jpg

Now I'm going to redo the baffles and paint it to match my stand.

Well here is the paint job. Did a panel of acrylic to go over the glass. Going to scrap off the white paint off the sump glass to make it clear again. This will be so I can use magnets to keep the acrylic in place and can be removed for viewing in the sump. Not finished but to give you a idea of what I'm doing.
http://i332.photobucket.com/albums/m339/ryno0212/7cad7c60.jpg
http://i332.photobucket.com/albums/m339/ryno0212/f3815df9.jpg
http://i332.photobucket.com/albums/m339/ryno0212/e9c4c794.jpg

[j tavares]

Awesome How did you cut the sump down, please advise

[ryno212]

With a good old regular glass cutter.

[ryno212]

I just cut the silicone down to where I wanted the glass level. I then cut the glass and broke it.