PO4x4 Phosphate Remover

[Saltgills]

Does anyone have experience with "PO4x4 Phosphate Remover"? It claims to be unique chemical engineered polymer based mini pellets, and that it can be regenerated up to 98% with their regeneration buffer. Just wondering if anyone has found this product to be more efficient than GFO.

Thanks,

Jim Craig

[endojoew]

I have been running the Phosballs for months. My nitrates are very low but phosphates still run in the .15 range. I would like to get it lower.

[Saltgills]

Joe, thanks for the input. Do you credit the phosballs or thee 4x4 Phosphate Remover for the low nitrates? On a separate system, I have been using only phosballs (since 1/1/11) but can't geet my nitrates bbelow 12.5 ppm but I do credit them for keeping my phosphates uner control.

[endojoew]

I am only using phosballs and my tank is overstocked with fish. I transitioned from AZNO3 to phos balls so I had a good start. I have not used the 4x4 PR so must be what is keeping nitrates down. At this point I am not surprised if two side by side identical systems would test different parameters. It appears to be very individual.

[coralreefnc]

I am using po4x4 for 2 months, it works pretty good buy is very small pellets. U have to use a media bag for sump orphosoate reactor. less dust and please read directions!

[Saltgills]

endojoew,
Thanks for sharing your experience. Just wondering, have you tried to recharge the resin with the buffer solution sold by the same company?